Automatic Densitymeter

The Rudolph DDM 2911 PLUS / 2911 / 2910 / 2909 Density Meters have the features to meet the needs of today's industries.

Read more
image01

Digital Refractometer

Rudolph have a large bouquet of various models of Refractometers to choose from. It varies depending on the application, the RI range, accuracy, budget among others.

Read more
image01

Digital Polarimeters

Rudolph manufactures various models of Polarimeters depending on accuracy, resolution, application, Temperature maintenance and budget. They vary from Autopol I to Autopol VI

Read more
image01

AUTOPOL VII Automatic Polarimeter

Rudolph’s latest in the series of Polarimeter - Autpol VII comes with fully automated sample loading combined with versatile sample loading, cell cleaning, rinsing, and drying built-In quartz plates automatically performing 3 point validation etc. comes as a total package.

Read more
image01

Portable Brix Meter

KEM, Japan Brixmeter model BX-1 is an automatic, digital system with an LCD display. The range is continuous between 0 – 85%Brix. The resolution is 0.1%Brix. This system is equipped with temperature compensation and has an IP-65 protection. This means that the system can be washed under the tap directly for cleaning the previous sample.

Read more
image01

Portable DensityMeter

The KEM, Japan portable Densitymeter model DA-130N is a microprocessor controlled system with an LCD display. It operates out of the ASTM approved "oscillation of the U-tube" method. It displays Density, Temperature-compensated Density, Specific Gravity, Temperature-compensated Specific Gravity, Brix%, Alcohol Concentration, Sulfuric Acid Concentration, API degree, Baume degree, Plato degree, Proof degree etc.

Read more
image01

Portable Refractometer

KEM, Japan portable Refractometer model RA130 is a light-weight, easy-to-use and a handy system. It is a microprocessor controlled instrument with an LCD display. The sample can either be dripped on the prism or the prism of the system can also be dipped into the sample beaker to measure RI. Since the system is IP-65 protected the system can be directly immersed into the sample beaker also.

Read more
image01

Texture Analyser

Shimadzu Texture Analyser is ideal and effective for testing Food (Texture Profile Analysis), Pharmaceutical Substances, Packaging materials, Medical Devices etc.. It can be fixed with a variety of jigs and fixtures. For the Food Industries many parameters including Hardness, Brittleness, Adhesiveness, Cohesiveness, Elasticity, Rubberness, Chewability etc. can be obtained from the user friendly software Trapezium X Texture

Read more
image01

UTM

Shimadzu Universal Testing Machine helps you to determine Tensile strength , Shear Test , Elongation Test for various materials which includes metals , plastics , rubber , wires etc .

Read more
image01

Contact Angle Meter

Kyowa Contact Angle Meter can perform Sessile Drop Method, Extension/Contraction method, Surface / Interfacial tension of liquids with Pendant drop method, Sliding Method & Dynamic Sliding Method. Model DMe-701 is the most automatic model and even stage movement and Droplet deposition are controlled through the PC. Right from the basest of models right upto Model DMe-701 are available depending on the application, capabilities, budget etc..

Read more
image01

Surface Tensiometer

Surface Tensiometers are widely used to check Surface Tension of Paints , Inks , Additives , Surfactant etc & same instrument is also used for the measurement of IFT - INTERFACIAL TENSION. The Interfacial Tension is mostly used in the study of quality of Transformer Oil.

Read more
image01

"CULTIVATION OF VIBRIO FISHERI"

Skalar offers the availability to cultivate your own luminescent bacteria according to ISO-11348-1. In a short course we train people in the cultivation of marine bacterium Vibrio fisheri (NRRL B-11177). International standards require the use of either freeze-dried bacteria as well as freshly prepared bacteria. Skalar organises training courses in using freshly prepared bacteria for the test according to ISO 11348-1. The method using freshly prepared bacteria provides the user with an almost inexhaustible source of bacterial reagent what is especially cost saving when many measurements have to be done. It is easy to perform with reliable results. The method is especially interesting when confronted with long shipment duration what is disastrous for the freeze-dried bacteria. The Skalar training program includes: Practical learning of the common standard microbiological methods for handling the bacteria. This includes the preparation of sterile culture medium, the transfer of the bacteria to liquid medium or agar plates and the cultivation of Vibrio fisheri (NRRL B-11177) and storage of the bacteria in the freezer. Also the preparation of the Standard Cell Suspension (SCS) and the application of the SCS in a bioluminescence assay with toxicants will be learned.

The ToxTracer luminometer can act as a stand-alone instrument. During measurement the inhibition values are directly shown on the display of the luminometer. It is also possible to store the measured inhibition values on your PC by using the ToxTracer software. The results are expressed in a table and for the dilution series the data are plotted in a graph. Automatically the dilution at 50% inhibition is extrapolated from the graph. The results shown in this screen can be printed out as a report.

The easiest way to perform the test is using the reagent kit SC 801000. The kit contains vials with freeze-dried bacteria, which can be stored for almost a year in the freezer without loss of sensitivity. They should be considered as a biochemical, which you dissolve and subsequently use in an assay.

The method is simple: First, the freeze-dried bacteria are re-constituted. While the bacteria equilibrate for 15 minutes, the sample is prepared: the osmotic value is adjusted and a dilution series prepared. Next the samples are added to the bacteria. After an exposure time of 5 to 30 minutes the light production is measured in the ToxTracer luminometer. If a reduction of the light emission is registered, toxic compounds are present.

Toxicity testing using freshly prepared bacteria according to ISO 11348-1
International standards require the use of either freeze-dried bacteria as well as freshly prepared bacteria. Skalar organises training courses in using freshly prepared bacteria for the test according to ISO 11348-1. The procedure with those bacteria provides the user with an almost inexhaustible source of bacterial reagent what is especially cost saving when many measurements have to be done. As compared to the freeze-dried bacterial preparations, the use of freshly prepared bacteria gives the user a better insight in the bio-availability of toxicants and improves the interpretation of the results.

Biological monitoring is increasingly important for testing the quality of water. Several biological test systems using different organisms exist. However, the test involving light emitting bacteria, is found to be the fastest and most reliable method. The ToxTracer System is a bioassay is based on this principle of inhibition of the natural bioluminescence of the marine bacterium Vibrio fischeri. Toxicants in the water sample inhibit the light emission of V. fischeri what can be measured with the Skalar ToxTracer Luminometer.
The test permits the user to detect rapidly toxic compounds in aqueous solutions. Especially when it concerns unknown poisonous chemicals, the method is preferable over the time consuming and laborious physical / chemical methods. Because of the fast metabolism of the bacterial cell this assay is much faster then other comparable bio-tests. The test can be accomplished within 30 minutes using the Skalar ToxTracer system.

alt

Biological monitoring

Biological monitoring is increasingly important for testing the quality of water. Several biological test systems using different organisms exist. However, the test involving light emitting bacteria, is found to be the fastest and most reliable method. The ToxTracer System is a bioassay is based on this principle of inhibition of the natural bioluminescence of the marine bacterium Vibrio fischeri. Toxicants in the water sample inhibit the light emission of V. fischeri what can be measured with the Skalar ToxTracer Luminometer.
The test permits the user to detect rapidly toxic compounds in aqueous solutions. Especially when it concerns unknown poisonous chemicals, the method is preferable over the time consuming and laborious physical / chemical methods. Because of the fast metabolism of the bacterial cell this assay is much faster then other comparable bio-tests. The test can be accomplished within 30 minutes using the Skalar ToxTracer system.

 

Products and Accessories

Mobile Fill Station image.pngportfolio_1.jpgportfolio_10.jpgportfolio_11.jpgportfolio_2.jpgportfolio_3.jpgportfolio_4.jpgportfolio_5.jpgportfolio_6.jpgportfolio_8.jpgportfolio_9.jpg

Why Choose Us?

 
  • Instruments from World- renowned manufacturers
  • Efficient after-sales service
  • Wide range of Instruments to choose from
  • Different kinds of AMCs to choose from
  • Efficient communication

Demo Requisition

 

Seeing is believing.  Email us your details and we shall conduct a demo of our system at your facility.

Read More

Principals

1.jpg12test.pngKyowa_logo.jpgShimadzu_Logo_and_Tagline.pngimage004.jpgozu.pngrudolph_logo.jpgsyscall-logo.png
scholarship essay for college students medical research paper home work help custom college papers technical writing service