alt alt alt


  • Maximum temperature 400°C
  • Utilises latest technology in digital imaging
  • 5.7 Inch colour VGA touch screen display
  • Unique split design concept
  • Integrated cooling 350°C to 50°C in 10 minutes 

Also available with IQ/OQ documentation 

SMP40 automatic melting point uses the latest technology in digital image processing, to accurately identify the melt of up to three samples simultaneously. The unit comes with a 5.7” colour VGA display, on which the melt can be watched real time, or the melt video will automatically be saved as an AVI file that can be reviewed later, either on the unit or via PC, providing traceability long after the sample has gone. The result can also be overridden if for any reason you don’t agree with the result calculated by the system.

This system is fully programmable via the touch screen display, once the user has set the plateau temperature they can select the ramp rate, between 0.1 and 10°C in 0.1°C increments. During use a library of preset methods can be built up to streamline the method input for repeat measurements. For materials where the user is unaware of an approximate melting point, and therefore unable to set the plateau temperature, the SMP40 can be used in rapid melt mode.

During rapid melt mode a fast scan of the full temperature range is undertaken to provide an approximate melt temperature, then a method will be automatically programmed with the appropriate plateau temperature to allow a more accurate measurement to be carried out.

The SMP40 has an innovative split design concept, the unit can be used as normal or the control side and the melt side can be separated, allowing for the maximum in footprint flexibility. After the samples have been loaded the melt side of the unit can be placed at the back of the bench or even in a fume cupboard to catch any potentially dangerous fumes. Once the unit has been split the control panel side can be used in two orientations, either landscape or portrait to allow the perfect viewing angle.

The unit can store up to 200 result files with videos, if required data can be easily transferred from the unit to a flash memory drive or PC via one of the USB connectors.

All units are supplied with a calibration certificate showing individual serial numbers for traceability. The SMP40 conforms to Pharmacopeia and GLP.

 No of samples

3 simultaneously

Temperature range

Ambient to 400°C

Temperature resolution




Ramp rates

0.1-10°C in 0.1°C increments

Temperature sensor

PT1000 Platinum resistance


200 results with video

Cool down time 350-50°C

~10 mins

Heat up time 50-350°C

~ 6 mins

Oven control

Closed loop PID

Flash memory/PC interface


Sample level

2-3mm in 50mm or 100mm length capillaries

Electrical supply

120V / 230V, 50Hz

Temperature units

°C, °F, K

Size (h x d x w)

175 x 210 x 328mm

Net Weight



English, French





Automatic melting point apparatus, complete with pack of 100 melting point tubes, closed at both ends.


Automatic melting point apparatus, complete with IQ/OQ documentation and pack of 100 melting point tubes, closed at both ends.


Glass melting point tubes, closed at both ends, pack of 100

homework help geometry custom term paper writing custom essay writing services canada write a research paper for me college essays for sale online