Universal Testing Machines (Single & Dual Column)
Universal Testing Machines – Mark-10, USA (Single Column) & Techlab Systems, Spain (Dual Column)
Universal Testing Machines (UTMs) are commonly used in any factory or laboratory with the need to test the strength of materials. The primary application of a UTM machines is to measure the tensile or compressive strength of different materials. Earlier called tensometers, they have different names in different industries, though the application remains the same. The ‘universal’ part in the name is because of their ability to perform a variety of tests on a wide range of materials. These universal testing machines (UTM machines) are also called force testing machines, compression and tensile testing machines, test stands, and force testers.
UTM machines vary based on the application and the maximum force required. The most common classification is based on the number of columns in the machine and the maximum force that the machine can exert to test it.
- Single column UTM machines – Mark-10 Corporation, USA
- Dual column UTM machines – Techlab Systems, Spain
Agaram Industries is the official and exclusive distributor of Mark-10 Corporation, USA (Single Column UTM machines) and Techlab Systems, Spain (Dual Column UTM machines) who manufacture force testing applications.
Single Column UTM Machines
In industries such as food, pharmaceuticals, and medical devices, single-column UTM machines are widely employed. In these industries, they are called Texture Analysers.
Mark-10 Texture Analysers are economical versions that measure Force Vs. Distance and Stress Vs. Strain curve, whereas Techlab’s Texture Analysers is an advanced versions that measures complete texture profile analysis in software like Adhesivity/Stick, Cohesivity, Hardness, Elasticity, Fraturability, Gummy, Chewable and other Texture Analysis.
The test stand forms the crux of the texture analyser and is responsible for exerting force on the object to be tested. The maximum tensile or compression force that can be exerted by the texture analyser setup mainly depends on the test stand. As the name suggests, single column UTM machines have test stands with a single column on which the grip with the force sensor travels up and down.
Mark-10 offers two types of test stands – manual and motorized test stands. In the manual models, the movement of the machine needs to be controlled manually by means of a lever or spinning wheel. Mark-10 offers a wide range of manual test stands starting from ones that can measure up to 150 N and the higher-capacity ones have a maximum capacity of 5 kN.
In the motorised single column models, the movement is controlled by a stepper motor and you also have the option of controlling it via a PC in the top-end models. The motorized test stands are suitable for tests requiring even application of higher forces up to 6.7 kN.
The force gauge is responsible for receiving and converting signals from force sensors into corresponding electric signals to display a digital value of the force detected.
Mark-10’s line-up has a variety of force gauges which vary based on specifications such as:
- force range
- resolution
- sampling rate
- accuracy
- data storage and output
- compatibility with software
- password protection
- units of measurement
Grips & Attachments
Based on the kind of experiment being performed, the grips and attachments vary. Mark-10 has ready-made grips for measuring the force applied in tests such as tensile, compression, bend, impact, peel, and so on.
Software
The software is responsible for extracting data from the texture analyser and performing various types of analysis on it to produce graphs and reports. A powerful software is responsible for making maximum use of the data obtained by the instrument. Mark-10 has two versions of software called MESUR™Lite, and MESUR™gauge Plus.
Dual Column UTM machines – Techlab Systems, Spain
Dual column UTM machines are more common in manufacturing industries since they usually have high force requirements. As the name suggests, these UTM machines have two columns on which the force sensor and grips traverse up and down through the length of the UTM frame.
One of the most popular manufacturers of dual-column UTM machines is Techlab Systems from Spain, with high European quality. Living up to the reputation that European technology has, Techlab manufactures machines that are robust and have a long life.
In the UTM machines sector, we have various models of bench-mounting and floor-mounting UTMs having a capacity to measure from 10 kN to 750 kN.
Salient Features Of Techlab's UTMs
- Control box equipped with processors and engine units for crosshead control and high-speed data sampling
- High-level auto-tuning for high accuracy even under noisy and disturbed conditions
- High sensitivity to force changes owing to a high sampling rate which instantaneously detects changes
- Precise strain rate control for steel and non-ferrous metal testing
- Ability to perform free run compression testing where the compression indenter or bending punch will run free until making contact with sample, after which a set force will be applied
Safety Features Of Techlab UTM
- Unnecessary to constantly replace joints and heavy-set jigs which reduces the risk in handling heavy objects
- Class 10 shaft alignment accuracy according to ASTM E1012 for data reliability
- Transparent, impact-resistant polycarbonate safety covers in the front and rear of test space to prevent samples from flying out when broken
- Overload detection to ensure that if the test force exceeds the load cell capacity, the crosshead stops automatically
- Safety function which stops the test if force exceeds the limit during specimen setting or return
- Safety cover to avoid scattering of test specimen during testing
- Emergency stop switches on both sides of the machine frame
Special Features Of Techlab UTM
- Real-time auto-tuning of control parameters based on test force and strain data according to ISO 6892-2009
- High testing efficiency because of the load cell precision range of 1/500 to 1/1
- Easy to change jigs since it has a single joint for tension and compression tests
- All test operations can be performed via the main operation panel, which eliminates the need to connect the machine to a PC
- Provides Industrial Compliance to many standards of ISO, ASTM, DIN, EN, UNE
To know about our Universal Testing Machine Price
Agaram Industries is an exclusive distributor of Mark-10’s force and torque measuring instruments. To get a quotation for the digital force gauge price, you can fill out this form or send an email to sales@agaramindia.com, or connect with us on WhatsApp at +91-90031-30625.
INTERESTED IN OUR PRODUCTS?
